2025 SCAG Power Equipment SFC-21 SFC-21-7CV

Selling Price -

Click for a Quote

*2025 does not indicate "model year" No discounts given based on listed year. See dealer for details.

Information

2025 SCAG Power Equipment SFC-21 SFC-21-7CV

THE BEST ON THE JOB OR AT HOME

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time.

Features may include:

FINE-TUNED AND SIMPLE
  • Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.
PERFORMANCE FOR THE LONG HAUL
  • Strong, stamped steel deck ensures years of worry-free performance and a consistent cut.
DESIGNED FOR VERSATILITY
  • Capable of 3-in-1 versatility, giving you the ability to mulch, bag or side-discharge. Mulching and bagging attachments come standard; side-discharge accessory is available.
DEPENDABLE, WORRY-FREE PRODUCTIVITY
  • Heavy-duty construction ensures years of dependable service and worry-free productivity.
SAFETY MEASURES THAT KEEP YOU WORKING
  • Blade brake clutch allows the operator to disengage the cutter blades without shutting off the machine.
MAXIMUM POWER FOR TOUGH CUTS
  • Powerful and efficient Kohler® Command PRO® CV173 (5hp) or CV224 (7hp) engine delivers ample power, along with exceptional efficiency and dependable performance in the toughest of cutting conditions. Proven, maintenance-free GT MG 512 transmission delivers dependable 3-speed drive power.
REPLACEABLE SIDE WEAR PROTECTION
  • Protecting both landscaping and the integrity of the cutter deck’s edge, these replaceable pads attach to the side of the mower and help minimize wear and tear between the environment you’re working in and your machine.

Photos

Highlights

  • Donnellson, Iowa
  • New
  • 13203
  • 2025
  • SCAG Power Equipment
  • SFC-21 SFC-21-7CV
  • Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
  • GT MG 512 transmission, 3-speed
  • gas
  • Available
  • 23.25"
  • Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments

Specifications

  • 2025
  • SCAG Power Equipment
  • SFC-21
  • SFC-21-7CV
  • Walking
  • Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
  • Kohler® Command PRO®
  • Easy-Pull™ recoil start
  • Horsepower: 7HP @ 3300 RPM
  • 224 cc
  • One with cast-iron cylinder bore
  • air-cooled
  • gas
  • Quad-Clean™ four-stage
  • cyclonic air filter
  • Front discharge muffler with guard
  • Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm
  • Transmission
  • GT MG 512 transmission, 3-speed
  • Travel Control: Variable drive control bar and 3-speed selector lever on handlebar
  • 0.50" diameter
  • Type: Heavy-duty Blade Brake Clutch (BBC)
  • 10.5 x 3
  • 9 x 2.25
  • Forward: Up to 4.25 mph
  • Oil: Steel oil pump; Full pressure lubrication with spin-on oil filter
  • 14 gauge
  • Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable | Cutter Blade: 0.1345 in. thick, milled edge, wear resistant
  • Operating Position: 63.0 - 68.5" | Storage Position: 41"
  • 23.25"
  • Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
  • 21 inches (53.34 cm)
  • 21.2"
  • 1 gallon (3.785 liters) plastic tank
  • without bagger: 138 lb | with bagger: 143 lb
  • Safety Group: Handle actuated operator presence system
  • 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.